Cisco 300-410 Questions Answers

Prepare for Cisco 300-410 with SkillCertExams

Getting 300-410 certification is an important step in your career, but preparing for it can feel challenging. At skillcertexams, we know that having the right resources and support is essential for success. That’s why we created a platform with everything you need to prepare for 300-410 and reach your certification goals with confidence.

Your Journey to Passing the Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) 300-410 Exam

Whether this is your first step toward earning the Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) 300-410 certification, or you're returning for another round, we’re here to help you succeed. We hope this exam challenges you, educates you, and equips you with the knowledge to pass with confidence. If this is your first study guide, take a deep breath—this could be the beginning of a rewarding career with great opportunities. If you’re already experienced, consider taking a moment to share your insights with newcomers. After all, it's the strength of our community that enhances our learning and makes this journey even more valuable.

Why Choose SkillCertExams for 300-410 Certification?

Expert-Crafted Practice Tests
Our practice tests are designed by experts to reflect the actual 300-410 practice questions. We cover a wide range of topics and exam formats to give you the best possible preparation. With realistic, timed tests, you can simulate the real exam environment and improve your time management skills.

Up-to-Date Study Materials
The world of certifications is constantly evolving, which is why we regularly update our study materials to match the latest exam trends and objectives. Our resources cover all the essential topics you’ll need to know, ensuring you’re well-prepared for the exam's current format.

Comprehensive Performance Analytics
Our platform not only helps you practice but also tracks your performance in real-time. By analyzing your strengths and areas for improvement, you’ll be able to focus your efforts on what matters most. This data-driven approach increases your chances of passing the 300-410 practice exam on your first try.

Learn Anytime, Anywhere
Flexibility is key when it comes to exam preparation. Whether you're at home, on the go, or taking a break at work, you can access our platform from any device. Study whenever it suits your schedule, without any hassle. We believe in making your learning process as convenient as possible.

Trusted by Thousands of Professionals
Over 10000+ professionals worldwide trust skillcertexams for their certification preparation. Our platform and study material has helped countless candidates successfully pass their 300-410 exam questions, and we’re confident it will help you too.

What You Get with SkillCertExams for 300-410

Realistic Practice Exams: Our practice tests are designed to the real 300-410 exam. With a variety of practice questions, you can assess your readiness and focus on key areas to improve.

Study Guides and Resources: In-depth study materials that cover every exam objective, keeping you on track to succeed.

Progress Tracking: Monitor your improvement with our tracking system that helps you identify weak areas and tailor your study plan.

Expert Support: Have questions or need clarification? Our team of experts is available to guide you every step of the way.

Achieve Your 300-410 Certification with Confidence

Certification isn’t just about passing an exam; it’s about building a solid foundation for your career. skillcertexams provides the resources, tools, and support to ensure that you’re fully prepared and confident on exam day. Our study material help you unlock new career opportunities and enhance your skillset with the 300-410 certification.

Related Exams

Cisco 300-410 Sample Questions

Question # 1

The network administrator configured CoPP so that all routing protocol traffic toward the router CPU is limited to 1 mbps. All traffic that exceeds this limit must be dropped. The router is running BGP and OSPF Management traffic for Telnet and SSH must be limited to 500kbps.access-list 100 permit tcp any any eq 179access-list 100 permit tcp any any range 22 23access-list 100 permit ospf any any!class-map CM-ROUTINGmatch access-group 100class-map CM-MGMTmatch access-group 100!policy-map PM-COPPclass CM-ROUTINGpolice 1000000 conform-action transmitclass CM-MGMTpolice 500000 conform-action transmit!control-planeservice-policy output PM-COPPNo traffic is filtering through CoPP,which is resulting in high CPU utilization,which configuration resolves the issue ?

A. no access-list 100access-list 100 permit tcp any any eq 179access-list 100 permit ospf any anyaccess-list 101 Permit tcp any any range 22 23!class-map CM-MGMTno match access-group 100match access-group 101
B. control-planeno service-policy output PM-COPPservice-policy input PM-COPP
C. No access-list 100access-list 100 permit tcp any any eq 179access-list 100 permit tcp any any range eq 22access-list 100 permit tcp any any range eq 23access-list 100 permit ospf any any 
D. no access-list 100access-list 100 permit tcp any any eq 179access-list 100 permit ospf any anyaccess-list 101 Permit tcp any any range 22 23!class-map CM-MGMTno match access-group 100match access-group 101!control-planeno service-policy output PM-COPPservice-policy input PM-COPP 

Show Answer

Question # 2

A network administrator is troubleshooting a high utilization issue on the route processor of a router that was reported by NMS The administrator logged into the router to check the control plane policing and observed that the BGP process is dropping a high number of routing packets and causing thousands of routes to recalculate frequently. Which solution resolves this issue?

A. Police the cir for BGP, conform-action transmit, and exceed action transmit.
B. Shape the pir for BGP, conform-action set-prec-transmit, and exceed action set-frdetransmit.
C. Shape the cir for BGP. conform-action transmit, and exceed action transmit.
D. Police the pir for BGP, conform-action set-prec-transmit, and exceed action set-clptransmit. 

Show Answer

Question # 3

What is a function of BFD?

A. peer recovery after a Layer 3 protocol adjacency failure
B. peer recovery after a Layer 2 adjacency failure
C. failure detection independent of routing protocols and media types
D. failure detection dependent on routing protocols and media types 

Show Answer

Question # 4

Which method provides failure detection in BFD?

A. short duration, high overhead
B. short duration, low overhead
C. long duration, high overhead
D. long duration, low overhead 

Show Answer

Question # 5

Which IPv6 feature enables a device to reject traffic when it is originated from an address that is not stored in the device binding table?

A. IPv6 Snooping
B. IPv6 Source Guard
C. IPv6 DAD Proxy
D. IPv6 RA Guard

Show Answer

Question # 6

Which feature minimizes DoS attacks on an IPv6 network?

A. IPv6 Binding Security Table
B. IPv6 Router Advertisement Guard
C. IPv6 Prefix Guard
D. IPv6 Destination Guard 

Show Answer

Question # 7

A newly installed spoke router is configured for DMVPN with the ip mtu 1400 command. Which configuration allows the spoke to use fragmentation with the maximum negotiated TCP MTU over GRE? 

A. ip tcp adjust-mss 1360 crypto ipsec fragmentation after-encryption 
B. ip tcp adjust-mtu 1360 crypto ipsec fragmentation after-encryption 
C. ip tcp adjust-mss 1360 crypto ipsec fragmentation mtu-discovery 
D. ip tcp adjust-mtu 1360 crypto ipsec fragmentation mtu-discovery 

Show Answer

Question # 8

What are two characteristics of IPv6 Source Guard? (Choose two.) 

A. requires IPv6 snooping on Layer 2 access or trunk ports  
B. used in service provider deployments to protect DDoS attacks  
C. requires the user to configure a static binding  
D. requires that validate prefix be enabled  
E. recovers missing binding table entries  

Show Answer

Question # 9

An engineer configured a router with this configuration ip access-hst DENY TELNET 10 deny tcp any any eq 23 log-inputThe router console starts receiving log message :%SEC-6-IPACCESSLOGP: listDENY_TELNET denied tcp 192.168.1.10(1022)(FastEthernet1/0 D508.89gb.003f) - >192.168.2.20(23), 1 packet" Which action stops messages on the console while still denying Telnet?  

A. Configure a 20 permit ip any any command  
B. Remove log-Input keyword from the access list.  
C. Replace log-input keyword with the log keyword in the access list.  
D. Configure a 20 permit ip any any log-input command.  

Show Answer

Question # 10

What must be configured by the network engineer to circumvent AS_PATH prevention mechanism in IP/VPN Hub and Spoke deployment scenarios? 

A. Use allows in and as-override at all Pes.  
B. Use allowas in and as-override at the PE-Hub.  
C. Use Allowas-in the PE_Hub  
D. Use as-override at the PE_Hub  

Show Answer

Question # 11

In a DMVPN network, the Spoke1 user observed that the voice traffic is coming to Spoke2 users via the hub router. Which command is required on both spoke routers to communicate directly to one another? 

A. ip nhrp map dynamic  
B. ip nhrp shortcut  
C. ip nhrp nhs multicast  
D. ip nhrp redirect  

Show Answer

Question # 12

Which IPv6 first hop security feature controls the traffic necessary for proper discovery of neighbor device operation and performance? 

A. RA Throttling  
B. Source or Destination Guard  
C. ND Multicast Suppression  
D. IPv6 Snooping  

Show Answer

Question # 13

What are the two goals of micro BFD sessions? (Choose two.) 

A. The high bandwidth member link of a link aggregation group must run BFD  
B. Run the BFD session with 3x3 ms hello timer  
C. Continuity for each member link of a link aggregation group must be verified  
D. Eny member link on a link aggregation group must run BFD  
E. Each member link of a link aggregation group must run BFD.  

Show Answer

Question # 14

What is an advantage of implementing BFD? 

A. BFD provides faster updates for any flapping route.  
B. BFD provides millisecond failure detection  
C. BFD is deployed without the need to run any routing protocol  
D. BFD provides better capabilities to maintain the routing table  

Show Answer

Question # 15

What is a function of an end device configured with DHCPv6 guard? 

A. If it is configured as a server, only prefix assignments are permitted.  
B. If it is configured as a relay agent, only prefix assignments are permitted.  
C. If it is configured as a client, messages are switched regardless of the assigned role.  
D. If it is configured as a client, only DHCP requests are permitted.  

Show Answer

Cisco 300-410 Reviews